A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
Tire Pressure Module: Service and Repair
Tire Pressure Monitoring Control Module
Tire Pressure Monitoring Control Module
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1783)
Removing
The tire pressure monitoring control module (J502 ) is located in the right front footwell under the instrument panel.
Before removing the tire pressure monitoring control module (J502), perform Guided Fault Finding under "replace control module".
-
Remove the glove compartment.
-
Remove the sill panel strip.
-
Remove the locking mechanisms - A arrows - and the cover - arrow B -.
-
Remove the bolt - 1 - and the vent - 2 -.
-
Remove the cover - arrow - and the pollen filter.