A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
/Page-1284002.png)
5
ATF pipe, supply
‹› From transmission to ATF cooler
‹› Before removal, mark the ATF pipes in relation to each other so they are not switched.
6
Bolt
‹› 5 Nm
‹› First insert the ATF pipes with new O-rings by hand as far as the stop
7
ATF line, supply
‹› From transmission to ATF cooler
‹› Before removal, mark the ATF pipes in relation to each other so they are not switched.
‹› Nuts on pipes, 29 Nm
‹› The ATF pipes are secured to each other
8
Bolt
‹› 8 Nm
9
Bracket
10
ATF pipe, return
‹› From the ATF cooler to the transmission
‹› Before removal, mark the ATF pipes in relation to each other so they are not switched.
‹› Nuts on pipes, 29 Nm
‹› The ATF pipes are secured to each other
11
Bolt
‹› 20 Nm
‹› First insert ATF lines with new O-rings by hand as far as the stop
‹› The retaining tab on the lower ATF pipe must lie on the transmission threads
‹› The retaining tab on the upper ATF pipe must lie on the lower one.
12
O-Ring
‹› Replace
‹› Coat with ATF before inserting
