A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
/Page-1366005.png)
-
Remove bolts - arrows - securing center bearing.
-
Remove the bolts that connect the driveshaft to the transmission by counterholding them with the counterholder (T10172) and (T10172/5).
-
Remove the driveshaft from the transmission and support it with the engine/transmission jack (V.A.G 1383 A).
-
Remove the mounting bolts - 1 - (quantity: 6) on the rear CV joint.
-
Use the counterhold tool (T10172) with the adapters (T10172/5) to do this.
