A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
-
Check whether there is a colored marking on the driveshaft and at flange/driveshaft on the rear final drive - arrow A - and - arrow B -.
-
If one of these markings is no longer visible (for example - arrow A - on the driveshaft), then mark the missing point in color.
‹› The marking on the driveshaft - arrow A - and on the rear final drive - arrow B - are on one line.
-
Attach Alignment Fixture (3139) and tighten plastic nuts.
‹› Never place the Assembly Fixture on the balance plates.
-
Remove bolts - arrows - securing center bearing.