A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
/Page-1344001.png)
Constant Velocity Joint: Overhaul
Peened Triple Roller Joint AAR 2600 i or 3300 i
Peened Triple Roller Joint AAR 2600 i or 3300 i
Special tools, testers and auxiliary items required
‹› Thrust plate (VW 401)
‹› Thrust plate (VW 402)
‹› Punch (VW 408 A)
‹› Punch (VW 411)
‹› Tube (VW 416 B)
‹› Thrust pad (VW 447 H)
‹› Hose clamp pliers (V.A.G 1275)
‹› Torque Wrench (V.A.G 1331)
‹› Torque Wrench (V.A.G 1332)
‹› CV joint boot clamp tool (V.A.G 1682)
‹› Assembly tool (T10065)
‹› Slide hammer - complete set (VW 771)
‹› Assembly device (T40018) for triple roller joint AAR 3300 i
‹› or Assembly device (T40084) for triple roller joint AAR 2600 i
‹› Brass or copper drift
Triple Roller Joint AAR 2600 i or 3300 i, Disassembling
-
Clamp drive axle horizontally in vise.
‹› Use vice clamp jaw protectors.
‹› Make sure that drive axle is not damaged.
-
Mark the location of the joint to the drive axle
If they are not marked and are not reinstalled in their previously installed positions, noises may occur later during driving operation.
A waterproof felt pen is well-suited for marking.
-
Open clamps - arrows -.
