A4 Quattro Sedan L4-2.0L Turbo (CAEB) (2009)
‹› Cage must be installed laterally correct.
-
Press in opposing balls in sequence, during this, previous position of ball hub to ball cage and to joint body must be re-established.
-
Press grease into joint body.
Grease Capacities and Types, Drive Shaft with 88 mm or 100 mm Outer Constant Velocity Joint, refer to => [ Grease Quantity and Type ] See:
Service and Repair/Removal and Replacement/Rear Suspension/Drive Axle with 88 mm Outer CV Joint and 100 mm Inner CV Joint, Assembly
Overview.