A4 Quattro Sedan V6-2.8L (ACK) (1997)
/Page-3855001.png)
Ultrasonic Sensor: Service and Repair
Interior Monitoring Sensors, Removing/Installing
-
Both sensors located under left and right "B" pillar trim.
Interior Monitoring Sensors
-
Remove "B" pillar trim.
-
Loosen screws -1- (2 x) at the side.
-
Remove sensor -2- from retainer -3-.
-
Disconnect harness connector -4- from sensor -2-.
-
Install in reverse sequence.
