A4 Quattro Sedan V6-2.8L (ACK) (1997)
^
Under no circumstances should grease or soap be used.
-
Install half shells into tube as shown in illustration (Tightening Rear Bonded Rubber Bushing) above.
-
Tighten Bracket -A- until press tool is flush with upper edge of tube.
Tightening Front Bonded Rubber Bushing
-
Raise tool 3372 and remove half-shell tool No. 3372/2, or equivalent.
-
Replace bridge through press tool No. 3351/1, or equivalent, and install bushing up to stop.