audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Electronic Stability Program (ESP) Hydraulic Pump|Page 7607 > < Transmission Speed Sensor, M/T|Service and Repair
Page 1
background image

Brake Fluid Pump: Service and Repair
Electronic Stability Program (ESP) Hydraulic Pump

Special tools and equipment 

-

Sealing plugs from repair kit Part No. 1 HO 698 311 A

-

VAG 155 1 or VAG 1552 scan tool

-

US1116 brake bleeder

CAUTION:  Part numbers are listed here for reference only. Always check with your Parts supplier for the latest information.

Component location

-

The ESP hydraulic pump is located on the left side of the engine compartment below the hydraulic control unit.

Removing 

-

Place vehicle on lift.

Note:  Switch off ignition before removal or installation work. If the vehicle is equipped with a coded radio determine the correct coding before
disconnecting the battery.

-

Raise vehicle.

-

Remove left-front wheel.

-

Remove left-front wheelhouse liner.

-

Disconnect electrical harness connectors (arrows).

-

Remove cover on hydraulic reservoir.

Electronic Stability Program (ESP) Hydraulic Pump|Page 7607 > < Transmission Speed Sensor, M/T|Service and Repair