A4 Quattro Sedan V6-2.8L (ACK) (1997)
/Page-3065002.png)
-
Press floating frame in direction of left arrows as far as stop.
-
Carefully press brake pads out of pistons using screwdriver (right arrow) and remove from caliper housing.
Note:
-
Thoroughly clean the brake caliper housing before installing the new brake pads.
-
Pay particular attention to cleaning the residues left from the outer brake pad adhesive.
Installing
-
Install bottom and top brake pads into pistons.
Note: Do not damage the protective boots when installing the brake pads.
-
Press floating frame out as far as stop.
-
Remove protective sheet from back of outer brake pads.
CAUTION: The repair kit contains four self-locking
-
Torch bolts which must always be installed.
