A4 Quattro Sedan V6-2.8L (ACK) (1997)
Parking Brake Cable: Service and Repair
Note: The parking brake cable adjusting components are in front of the lower rear control arms.
Removing
-
Remove both rear wheels.
-
Remove locking element-D-.
-
Counter hold hex -E- using 13 mm open end wrench and turn adjusting nut -C- in to stop.
-
Slide cable adjuster together (arrow -B-).
-
Pull out locking plate -1-.
-
Remove parking brake cables at brake caliper.
Note: Do not damage the parking brake cable boot when removing and installing.
-
Remove parking brake cables near underbody and fuel tank (arrows).
Note: Assembly aid for parking brake cable may drop out. It does not need to be reinstalled.