audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Exhaust System|Service and Repair|Page 3533 > < Exhaust Manifold|Specifications
Page 1
background image

Muffler: Service and Repair

Vehicles with all-wheel drive 

Vehicles with front-wheel-drive. Refer to Mufflers with mounts.

1. 40 Nm (30 ft. lbs.) 
2. From TWC
3. Carriage bolts
4. Double clamp
5. 25 Nm (18 ft. lbs.) 
6. Mounts

-

With retaining ring

7. Center muffler
8. Double clamp (for repair)
9. Separating points

-

At factory, center and rear mufflers are installed as single component. Replacement center and rear mufflers are supplied separately, with
double clamp for connecting joint

-

Cutting through at separating point refer to Fig. 1

10.  Right-rear muffler
11. Mounts
12. Brackets
13. Left-rear muffler

Fig. 1 Separating point between front and rear mufflers 
Cutting 
-

Using VAG1523 body saw, cut through connecting pipe between center muffler and rear muffler at groove.
Distance -a-: approximately 244 mm (9-1/2 inch).

Vehicles with front wheel drive 

Exhaust System|Service and Repair|Page 3533 > < Exhaust Manifold|Specifications