A4 Quattro Sedan V6-2.8L (ACK) (1997)
Air Door Actuator / Motor: Service and Repair
Central Air Flap Motor -V70- Remove and Install
Central Air Flap Motor -V70-, Removing and Installing
Remove complete front section of center console
-
Loosen floor outlet from the right instrument panel support.
-
Identify and mark electrical connectors at flap motor prior to disconnecting (to prevent mix up) and remove from motor.
-
Remove 3 bolts -A-.
-
Remove motor and unhook lever -B- (color: blue).
Notess for installing:
-
After installing, always check DTC memory.
-
When installing flap motor, ensure that relay lever -B- is correctly positioned.
-
Testing -V70- (output DTM).
-
Electrical test.
-
Wiring harness must be installed so that it does not come in contact with moving components (e.g. motor linkage).