A4 Quattro Sedan V6-2.8L (ACK) (1997)
/Page-3646003.png)
Removing and installing (A/C control head with single display)
Removing
CAUTION!
-
Obtain security code for anti-theft radio.
-
Note customer's pre-set radio stations.
-
Disconnect battery Ground (GND) strap.
Remove radio or radion with navigation system
-
Grip control head through radio opening and slide rearward.
NOTE:
-
The control head is held in the center console with 4 clips -A-.
-
Before replacing the control head, ensure correct application (e.g. with or without knockouts for switches for seat heaters)
-
Press seat heater switches -C- back into control head so that latches -B- are engaged.
-
Make sure that the hose for the instrument panel interior temperature sensor -G56- is not kinked or otherwise closed off.
