A4 Quattro Sedan V6-2.8L (ACK) (1997)
6
-
Harness connector
-
For fuel pump and sender for fuel gauge -G
7
-
Hose guide
-
Installed position as shown.
-
Must be kept in position while union nut is being tightened.
8
-
Union nut
-
60 Nm
-
Remove and install using 3217 wrench
9
-
Wiring to fuel pump
-
Attach with fuel resistant cable ties (item 10)
10
-
Supply line
-
Fuel pump/surge housing
-
2 Nm
-
Install toothed washer beneath
11
-
Nut M4
-
1.5 Nm
-
Install toothed washer beneath
12
-
Nut M5
13
-
Fuel supply unit
-
Electrically check fuel pump
-
Check the residual pressure.
14
-
Fuel strainer
-
Connected to fuel supply unit
-
Can not be individually replaced
-
Clean if dirty
15
-
Surge housing lower section
-
Mounted in fuel tank
-
Can not be removed
-
Disconnecting: press unlatching buttons on connector piece
16
-
Sender for fuel gauge -G
-
Float is cube shaped
17
-
Return line
-
Installed inside cover flange