A4 Quattro Sedan V6-2.8L (ACK) (1997)
/Page-808002.png)
-
Install 3242 crankshaft holder into sealing plug opening.
-
Remove tensioner for ribbed belt.
-
Remove center and right toothed belt guards.
CAUTION: Before removing ribbed belt, note direction of rotation with chalk or felt-tip marker. Reversing the direction of rotation of a used
belt can destroy the belt. When installing the ribbed belt, make sure it is seated correctly on the pulley.
Notes:
The toothed belt tensioner is oil dampened. Compress it by slowly applying constant pressure.
Use spring clamp from 2024A.
-
Using 8 mm hex wrench, turn toothed belt tensioning roller -1- clockwise until tensioning lever -2- compresses tensioner -3- so that spring clamp
(2 mm diameter) can be inserted into bore and lifter.
-
Insert pin and release tension.
-
Remove vibration damper, refer to Cylinder Block Assembly/Harmonic Balancer/Service and Repair See: Engine, Cooling and
Exhaust/Engine/Cylinder Block Assembly/Harmonic Balancer - Crankshaft Pulley/Service and Repair
-
Remove idler wheel for ribbed belt (arrows).
-
Remove toothed belt.
Installing
