A4 Quattro Sedan V6-2.8L (ACK) (1997)
/Page-3762001.png)
Airbag Spiral Spring/Return Spring With Slip Ring: Service and Repair
Standard Steering Wheel
Spiral Spring, Removing And Installing
WARNING!
Follow all safety precautions when working on airbags.
-
Disconnect battery Ground (GND) strap.
-
Wheels must be facing straight ahead.
-
Remove steering wheel.
-
Remove bolts -5- (4x) from carrier unit -6-.
-
Remove bolts -7- (4x) from spiral spring -8-.
WARNING!
Steering wheel and spiral spring can only be removed with the wheel straight-ahead. Do not rotate spiral spring after it is removed.
NOTE:
-
Even if spiral spring has been turned, determine center position.
-
From the center position, the spiral spring should rotate approx. 3 1/2 revolutions in both directions.
1
-
Airbag unit
