A4 Quattro Sedan V6-2.8L (ACK) (1997)
CAUTION!
The thread washer must always be installed from below (trunk side).
7
-
Threaded washer
-
Secured on trunk side with pop rivets -6-
-
Threaded insert points upward
Rear Upper Tethers, Retrofitting
-
Beginning in trunk, use felt tip marker to mark center point of center holes (3x).
-
Remove rear shelf.
CAUTION!
The thread washer must always be installed from below (trunk side).
-
Install threaded washer -7- starting from trunk.
-
Cut 23 mm hole at each marked point (3x).
-
Install rear shelf.
-
1, 2, or 3 attachment stops can be installed as needed.
-
Install spacer sleeve and secure attachment stop with bolt -3-.
-
Close other holes using cover -1-.