A4 Quattro Sedan V6-2.8L (ACK) (1997)
Fig. 2 Unbolting ribbed belt cover
Fig. 3 Loosening and removing ribbed belt
-
Using 17 mm hex wrench, turn clockwise (arrow) to loosen ribbed belt.
-
Align holes -A- and -B-.
-
Insert 3204 drift to lock tensioner in position.
-
Remove ribbed belt from belt pulley.
CAUTION: Mark the running direction before removing. Reinstalling a used belt in reversed running direction could damage the belt.
Fig. 4 Assignment of ignition wires to ignition coils
A - Ignition coil for cylinders 5 and 3
B - Ignition coil for cylinders 4 and 2
C - Ignition coil for cylinders 6 and 1
The ignition wires are numbered from 1 to 6:
-
Connect ignition wires 5 and 3 to ignition coil -A-.
-
Connect ignition wires 4 and 2 to ignition coil -B-.
-
Connect ignition wires 6 and 1 to ignition coil -C-.