A4 Quattro Sedan V6-2.8L (ACK) (1997)
Fig. 5 Installation position of lower spring plate
-
Make sure lower spring plate is correctly positioned before installing coil spring:
-
Hole (arrow) in spring plate -1should be perpendicular (90°) to bolt axis -A- of shock absorber -2-
-
Allowable deviation: ± 2°
Fig. 6 Installing coil spring
The lower spring support is located by a recess in the spring plate.
-
Install protective cap and stop buffer.
-
Install coil spring onto lower spring base using VAG1752/1 tensioning device.
-
End of coil spring must lie against stop (arrow)