A4 Quattro Sedan V6-2.8L (ACK) (1997)
Fluid - M/T: Testing and Inspection
Transmission Oil Level, Checking
Special tools and equipment
-
17 mm wrench insert hex socket or
-
3357 triple square socket driver
Notes:
-
The oil filler plug is on the left of the transmission below the speedometer vehicle speed sensor and may be concealed by the heat shield for the
drive axle.
-
Depending on the version installed, use either 3357 triple square socket driver or a 17 mm to loosen the oil filler plug.
-
Use 3357 triple square socket driver to loosen the oil drain plug.
-
To check oil level, remove oil filler plug (arrow).
Specification: Oil level up to bottom of filler hole
-
Top off transmission oil if necessary.
Specification, Refer to Manual Transaxle/Transmission, Specifications.
-
Install oil filler plug.
Tightening torque: 25 Nm (18 ft. lbs.)