A4 Quattro Sedan V6-3.0L (AVK) (2002)
/Page-1818001.png)
Brake Rotor/Disc: Service and Repair
Rear Brake Calipers C38, Servicing
Rear Brakes C38
Brake calipers, servicing
Rear brakes with automatic adjustment
Notes: Always install the complete repair kit.
1. Brake disc
^
Always replace on both sides of the car
^
Remove brake caliper prior to removing
^
Always dress evenly, on both sides, starting from thickness when new
^
Thickness, Refer to Brakes and Traction Control, Specifications, Mechanical
2. Ribbed bolt, 80 Nm
^
M10 x 125 x 60
^
Always replace
3. Brake carrier with guide pin and protective cap
^
Supplied as replacement part assembled with sufficient quantities of grease on guide pins
^
If protective caps or guide pins are damaged, install repair kit. Use grease sachet supplied to lubricate guide pins.
4. Ribbed bolt, 75 Nm
^
M10 x 125 x 50
^
Always replace
5. Brake pads
^
Always replace on both sides of the car
^
Removing and installing, Refer to Brake Pads, Service and Repair
^
Thickness, Refer to Brakes and Traction Control, Specifications, Mechanical
^
Checking thickness, Refer to Brakes and Traction Control, Specifications, Mechanical
6. Brake disc cover
7. Flange bolt, 10 Nm
^
M6 x 12
