A4 Quattro Sedan V6-3.0L (AVK) (2002)
/Page-760001.png)
Thermostat: Service and Repair
Coolant Thermostat, Removing, Installing and Checking
Coolant thermostat, removing, installing and checking
Removing
^
Drain coolant.
^
Remove intake manifold.
^
Remove bolts -1- and -2-.
^
Disconnect coolant hose (arrows).
^
Remove coolant regulator with connection.
Installing
Installation is reverse of removal:
Note: Replace O-ring.
^
Clean and/or smooth O-ring sealing surface before installing.
^
Install coolant regulator with coolant regulator housing.
^
Install intake manifold.
Tightening torque
