A4 Quattro Sedan V6-3.0L (AVK) (2002)
/Page-650003.png)
-
Unbolt oil pan (lower part) -1- and carefully remove.
-
Using rotating plastic brush, remove any remaining sealant from oil pan (lower part) and at upper part.
WARNING: Wear protective glasses.
-
Clean sealing surfaces so they are completely free of any oil or grease.
Installing
Installation is reverse of removal, noting the following:
Note: Replace gaskets and O-rings.
-
Cut tube nozzle at front marking (jet diameter approximately 1 mm).
