A4 Quattro Sedan V6-3.0L (AVK) (2002)
/Page-773002.png)
^
Remove bolts for holding plate -3- for solenoid valves (arrows).
^
Disconnect electrical harness connector at Mass Air Flow (MAF) sensor.
^
Remove hose -4- from air duct -2-.
^
Remove bolt (arrow) and disconnect air duct -2- at throttle valve control module.
^
Disconnect hose -1- from air duct.
Note: Illustration shows the air guide from rear with the engine removed.
^
Remove harness connectors -1 to 4- from bracket at right of bulkhead.
^
Disconnect electrical harness connectors -1- and -4-.
^
Guide wires to the oxygen sensors downward.
^
Remove nut -2- for exhaust pipehaust manifold which is accessible from top.
Note: Illustration is shown with engine removed.
