A4 Quattro Sedan V6-3.0L (AVK) (2002)
/Page-451007.png)
-
Fill with ATF using VAG 1924 ATF filler tool until ATF exits from the check hole.
-
Shift selector lever into position P
-
Start engine.
-
Keeping the brake pedal depressed, shift into all selector lever positions at idle speed. Each position must remain selected for at least V.A.G 1924
10 seconds.
-
Shift selector lever into position P
-
Check ATF level and top off.
-
Install noise insulation.
Note: Observe all notes and test requirements for Checking ATF level.
