A4 Quattro Sedan V6-3.0L (AVK) (2002)
^
Remove bolts -1- and -2- and move lines at coolant pipe to side.
^
Remove coolant pipe toward front (arrow).
Installing
Installation is reverse of removal:
Note: Secure all hose connections using hose clamps appropriate for the model type:
Refer to Parts Supplier
^
Replace O-rings.
^
Clean and/or smooth O-ring sealing surface before installing.
^
Coat new O-ring with G12 and slide onto coolant pipe.
^
Slide front coolant pipe into the hole at rear coolant pipe.
^
Install intake manifold.
^
Install toothed belt (adjust timing).
^
Fill up power steering fluid and bleed steering system:
Tightening torques
1) Replace bolts.