A4 Quattro Sedan V6-3.0L (AVK) (2002)
2 (signal)
81
3 (ground)
108
-
Camshaft Position (CMP) sensor 4 -G301- (Bank 2).
Connector
Test box VAG 1598/31
terminal
Socket
1 (positive)
98
2 (signal)
54
3 (ground)
108
-
Repair any open/short circuit as necessary.
Check phase position of CMP sensor
-
Connect testing and information system VAS 5051 and select vehicle system "01 - Engine electronics" in selection. Engine must be running at
idling speed. See: Computers and Control Systems/Testing and Inspection/Scan Tool Testing and Procedures/Scan Tool Testing/Scan Tool
Connecting and Initial Checks/Connecting VAS 5051 Scan Tool
Display on VAS5051:
-
Under -1- select diagnostic function "08 - Read measured value block".
Display on VAS5051:
1
-
Enter display group - Enter "093" for "display group number 093" in zone -2- and confirm entry by pressing -Q- button.
Display on VAS5051: