A4 Quattro Sedan V6-3.0L (AVK) (2002)
/Page-2335003.png)
-
Cut igniter wire 1 (arrow) next to airbag connector (on airbag side).
-
Cut igniter wire 1 (arrow) next to airbag connector on (seat harness side).
^
Using VAS 1978A wiring repair kit including crimping tool VAS 1978/1 with VAS 1978/24 insert:
-
Strip wires and splice using a 4 inch section of repair wire (Part No: 000 979 010) and 2 butt connectors (Part No: 111 971 941A).
^
This allows the harness additional slack.
-
Repeat above steps for igniter wire 2.
Tip:
