A4 Quattro Sedan V6-3.0L (AVK) (2002)
Side Air Bag: Locations
Passenger Side Airbag, Assembly Overview
Passenger Side Airbag, Assembly Overview
WARNING: Observe safety precautions for working on airbags.
1
-
Passenger-side airbag unit
See Cautions before beginning repairs on electrical system
-
Removal
-
Disconnect battery Ground (GND) strap.
-
Remove glove compartment
-
Remove glove compartment (vehicles with knee bolster)
-
Disconnect harness connector behind airbag unit =>Fig 1
WARNING: Harness connector -5- (red, 2-pin) to passenger-side airbag unit must not be disconnected under any circumstances!
-
Remove brace behind airbag unit -2-(2x).
-
Remove nut -3- (4x).
-
Remove airbag unit.
-
Place airbag unit on a suitable surface with impact padding facing up.
-
Installing
-
Install airbag unit.
-
Make sure connector behind airbag unit completely (audibly) engages.
-
Switch on ignition.
WARNING: No person may be inside the vehicle when connecting the battery.