A4 Quattro Sedan V6-3.0L (AVK) (2002)
Wheel Speed Sensor: Service and Repair
ABS System Components on Front Axle, Removing and Installing
ABS system components on front axle, removing and installing
1. Hex socket-head bolt
^
Tightening torque: 10 Nm
2. Speed sensor
^
Identical part on left and right
^
Grease all around with lubricating paste G 000 650 before inserting in wheel bearing housing
^
Press home in wheel bearing housing
3. Drive axle with rotor
^
Inspect rotor for signs of dirt and damage
^
If the rotor is damaged, replace the outer CV joint together with the rotor:
^
Outer CV joint is supplied as a replacement part with the rotor
4. Speed sensor wire
^
Attach using the designated retainers
5. Hex socket-head bolt
^
Always replace
^
Different versions Parts Supplier
Vehicle must be standing on the ground when tightening this bolt.
Tightening torque: