A4 Quattro Sedan V6-3.0L (AVK) (2002)
Discharge Air Temperature Sensor / Switch: Service and Repair
Right Footwell Vent Temperature Sensor -G262- Remove & Install
Right Footwell Vent Temperature Sensor -G262-, Removing And Installing
NOTE: Observe connector arrangement to both sensors -G261- and -G262- (mix-up alert)
Removing
-
Remove A/C Control Head -E87-.
-
Reach through opening for the A/C control head and disconnect connector -A-.
-
Turn vent temperature sensor -B- approx. 90 degrees in direction of arrow.
-
Remove vent temperature sensor out of air conditioner.
Installing
Installation is the reverse of removal.