A4 Quattro Sedan V6-3.0L (AVK) (2002)
Ignition Lock: Service and Repair
Ignition lock, removing and installing
Removing
-
Remove steering column.
-
Chisel out shear bolt.
Note:
^
Steering column must be clamped in a vice as shown for chiseling out shear bolts.
^
Mounting bracket of steering column will be damaged if work is performed with steering column installed.
Installing
-
Tighten shear bolt to 20 Nm.
Head of bolt should shear off in this torque range
Perform remaining installation operations in reverse order from removal