A4 Quattro Sedan V6-3.0L (AVK) (2002)
NOTE: Always observe specifications for replacing induction coil for anti-theft immobilizer if lock cylinder must be replaced.
Installing
Installation is reverse of removal, noting the following:
-
Insert spare key into lock cylinder and turn to position "ignition on".
-
Re-insert steel wire or pin -1- into the hole in front of lock up to stop.
-
Slide lock cylinder -2- with induction coil into steering lock housing -3-.
-
Then pull out wire and press in lock cylinder firmly until catch engages audibly.
-
Install steering column switch:
-
Connect electrical harness connector at induction coil for anti-theft immobilizer when installing steering column switch.