A4 Quattro Sedan V6-3.0L (AVK) (2002)
The PR no for suspension versions can be seen in the illustration -see arrow-.
1 BA = Standard suspension
1 BE, 1 BV = Sports suspension
1 BR = Comfort (rough road) suspension
Fig. 1 Removing coil spring
-
Clamp suspension strut in vice
-
Pre-tension coil spring with tensioner VAG 1752/1 and spring plate VAG 1752/4 until upper spring plate is free.
Fig. 2 Removing coil spring
-
................................................................................. In doing so pay attention to correct positioning -arrow- of coil spring in adapter VAG 1752/6.
Fig. 3 Removing coil spring
-
Unfasten collared nut from piston rod using special tools -T10001/3-, T10001/11 and T10001/7.
-
Remove suspension strut components and pre-tensioned coil spring with tensioner VAG 1752/1.
Fig. 4 Replacing shock absorber
-
Remove protective cap -1- and lower spring seat -2-.
-
Mark installation position of lower spring plate in relation to shock absorber.
-
Loosen spring plate -3- using a plastic hammer and lift up to remove.