A4 Quattro Sedan V6-3.0L (AVK) (2002)
-
Remove bolts for final drive cover opposite of shown tightening sequence and remove cover.
Installing
-
Replace sealing ring (arrow).
-
Install cover for final drive.
Tightening sequence:
^
1. Stage: Tighten bolts -1- to -3- by hand
^
2. Stage: Tighten bolts -1- to -12- in specified sequence to tightening torque
-
Install right drive flange.
-
Install transmission support.
-
Install right front exhaust pipe.
-
Install drive axle.
-
Top-up and check gear oil in front final drive.