A4 Quattro Sedan V6-3.0L (AVK) (2002)
-
If necessary press brake pedal securing clip off pivot pin with a screwdriver.
-
Take out clutch pedal and over-center spring.
Installing
Installation is carried out in the reverse order, when doing this note the following:
-
Align clutch pedal/brake pedal pivot pin so that it protrudes out of mounting bracket at clutch pedal side (arrow).
-
Hook clutch pedal into over-center spring, then fit onto pivot pin.
-
Connect clutch pedal to master cylinder. Clip pin onto clutch pedal.
Do not tighten bolt (arrow) until both securing clips have been fitted on the clutch pedal/brake pedal pivot pin.