A4 Quattro Sedan V6-3.0L (AVK) (2002)
Axle Shaft Assembly: Service and Repair
Drive Axle With Inner CV Joint (108 mm Diameter), Servicing
Drive axle with inner constant velocity joint (108 mm diameter), servicing
Grease quantities and types
Constant velocity joints are filled with lubricating grease G 000 603
Re-grease joint if boot is replaced.
1. Cover
^
Knock out carefully with mandrel
^
Always replace
^
Apply D 454 300 A2 to sealing surface before fitting to constant velocity joint, Aligning cover with bolt holes
2. Circlip
^
Use commercially available circlip pliers for extraction and installation
3. Inner constant velocity joint with cap for boot