A4 Quattro Wagon L4-1.8L Turbo (AEB) (1999)
/Page-5588002.png)
8. Support for adjusting camber
^
Welded to control arm on both sides
^
Make sure that eccentric bolt and washer are correctly located
9. Eccentric washer
10. Self-locking nut
^
Always replace
^
50 Nm (37 ft. lbs.) + 1/4-turn (90°)
^
When tightening, hold upper control arm horizontal
^
Vehicle must be standing on its wheels when tightening nut
11. Suspension strut
^
Removing and installing
^
Servicing
12. Wheel housing
13. Bolt + washer
^
55 Nm (41 ft. lbs.)
14. Bolt
^
Always replace
15. Bolt
^
Always replace
16. Upper control arm
^
Removing and installing
^
Servicing
17. Wheel bearing housing
18. Washer
^
Always replace
19. Self-locking nut
^
Always replace
^
50 Nm (37 ft. lbs.) + 1/4-turn (90°)
20. Self-locking nut
^
Always replace
^
95 Nm (70 ft. lbs.)
21. Self-locking nut
^
Always replace
^
50 Nm (37 ft. lbs.)
22. Self-locking nut
^
Always replace
^
50 Nm (37 ft. lbs.)
