A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
Display Group 006
NOTE: The VAG1552 mobile Scan Tool (ST) can be used instead of the VAG1551. However the VAG1552 scan tool does not have printing
capabilities.
Test conditions
-
Battery voltage at least 11 V
-
Ground (GND) connections on engine and transmission OK
-
Fuse OK
-
Unclip cover for Data Link Connector (DLC), located under driver's side knee bar, behind steering wheel (left-side).
-
Connect VAG1551 or VAG1552 Scan Tool (ST) with VAG1551/3 adapter cable to DLC.
Indicated on display 1)
V.A.G - ON BOARD DIAGNOSTIC
HELP
1 - Rapid data transfer
2 - Blink code output
1) Operating modes 1 and 2 are displayed alternately
NOTE: If the display remains blank:
See Scan Tool operating instructions
-
Switch ignition on.
-
Switch on printer by pressing PRINT button (indicator lamp in button lights up).
-
Press button -1- to select "Rapid data transfer" operating mode 1.
Indicated on display
Rapid data transfer
HELP
Select function XX
NOTE: In "Rapid data transfer" operating mode 1 the "Automatic Test Sequence" function 00 can be carried out. This checks the Diagnostic Trouble