A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
Fig. 2 Removing cover for rear lid lock
NOTE: Part is shown in removed condition for the sake of illustration.
-
Tailgate trim must be removed before removing cover.
-
To remove, disengage locking mechanisms (arrows) using a screwdriver and pull off cover.
Fig. 3 Installing cover for rear lid lock
-
Tilt cover 90 degrees in direction of arrow - A -.
-
Slide cover - 1 - onto rear lid lick - 2 - until retaining tabs (arrows - C -) engage completely in bore holes (arrows - B -) on both sides.
-
Perform a function test for proper closure of rear lid.