A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
/Page-2029002.png)
^
Must fit on bushings
^
Do not damage or bend while performing repairs
10 - Bolt
^
10 Nm(7 ft. lbs.)
11 - Rear oil seal flange With oil seal
^
Replace as complete unit
^
Lightly oil lip of seal
^
Before installing oil pan, spread sealant AMV 174 004 01 on joint between oil seal flange and cylinder block
12 - Oil seal
^
Replacing, Refer to Seals and Gaskets, Engine, Crankshaft Main Bearing Seal, Service and Repair
13 - Intermediate shaft
^
Axial play, maximum: 0.25 mm (0.010 inch)
14 - O-ring
^
Always replace
15 - Oil seal carrier for intermediate shaft
