A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
Drive Belt: Service and Repair
Ribbed Belt For P/S, Gen & Viscous Fan; V-Belt For Coolant Pump
Ribbed belt for power steering pump, generator and viscous fan, and V-belt for coolant pump
CAUTION! Before removing ribbed belt, note direction of rotation with chalk or felt-tip marker. Reversing the direction of rotation of a used belt
can destroy the belt. When installing the ribbed belt, make sure it is seated correctly on the pulley.
1 - Fan wheel bolt
-
10 Nm(7 ft. lbs.)
2 - Fan wheel
-
For viscous fan
-
Removing and installing, Refer to V-Belt and Ribbed Belt, Routing Overview, See Fig. 1 See: V-Belt and Ribbed Belt, Routing Overview
3 - Coolant pump pulley bolt
-
25 Nm (18 ft. lbs.)
4 - Belt pulley
-
For coolant pump
-
V-belt design
-
Installed position: straight side toward coolant pump
5 - Ribbed belt
-
Removing and installing, Refer to V-Belt and Ribbed Belt, Routing Overview
-
Check for wear
6 - Special bolt
-
Tighten to 40 Nm (30 ft. lbs.)
-
Only use VW bolts, bolt strength grade 10.9 Parts Supplier