A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
Drive Belt: Service and Repair
Ribbed Belt, Removing and Installing
Ribbed belt, removing and installing
-
Lock carrier in service position, See: Body and Frame/Lock Carrier/Service and Repair/Procedures
CAUTION! Before removing ribbed belt, note direction of rotation with chalk or felt-tip marker. Reversing the direction of rotation of a used belt
can destroy the belt. When installing the ribbed belt, make sure it is seated correctly on the pulley.
Removing
-
Remove noise insulation panel (arrows).
-
Loosen bolts for ribbed belt tensioner for A/C compressor (arrows).
-
Release tension on ribbed belt and remove belt.
All models
-
Move ribbed belt tensioner in direction of arrow to release tension on ribbed belt.