audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Engine Oil|Capacity Specifications|Page 5540 > < Engine Oil|Capacity Specifications|Page 5538
Page 1
background image

Engine Oil: Testing and Inspection

Oil level, checking

 

Test conditions 
^

Minimum engine oil temperature: 60°C (140°F) 

^

Vehicle on level ground

^

After stopping engine, wait a few minutes to allow oil to flow back into oil pan

^

Withdraw dipstick, wipe off using clean cloth and reinsert fully.

^

Withdraw dipstick again and read oil level.

Range of markings on dipstick:
a - Oil MUST NOT be topped off.
b - Oil may be topped off. After topping off, oil may reach range -a-.
c - Oil MUST BE topped off. After topping off, it is sufficient if oil level is somewhere in range -b- (shaded area).

CAUTION!  Do not overfill with oil past the MAX mark on the oil dipstick. Damage to the Three Way Catalytic Converter (TWC) could result.

Engine Oil|Capacity Specifications|Page 5540 > < Engine Oil|Capacity Specifications|Page 5538