A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
/Page-6370002.png)
-
Remove screws -A-.
Remove center instrument panel trim
-
Remove screws -B-.
-
Remove A/C control head.
-
Push back connector locks and unplug electrical connectors.
-
Install in reverse order of removal.
NOTE:
-
After installing E87, check that shaped hose -C- of temperature sensor G56 (blower V42) is routed correctly (not kinked).
-
When installing screws -B-, position the center trim mounts correctly.
-
After installing E87, always confirm correct coding, perform basic setting and check DTC memory.
