A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
-
Remove bolts -A-.
-
Disconnect all electrical connections from instrument panel harness to heater/air conditioner assembly.
-
Remove bolts -A-.
-
Remove heater/air conditioner assembly towards passenger side.
-
Install in reverse order of removal.
Notes on installation:
-
Replace all damaged heater/air conditioner assembly seals.
-
Replace all removed cable tie wraps in the same location.
-
Always replace evaporator inlet/outlet O-rings.
-
Ensure refrigerant lines fit into evaporator without binding.
-
Check evaporator line and heater core bulkhead grommets for correct fit.
-
Check evaporator drain and evaporator drain valve for correct fit.