A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
-
Remove the center three ribs -black arrows- from lighter assembly using a Dremel(R) tool (or similar). DO NOT, remove two outer ribs -white
arrows-!
-
Also carefully remove raised edge of material along the three inner ribs.
Illustration shows 3 inner ribs removed.
CAUTION!
DO NOT remove the two outer ribs!
-
Insert lighter element into socket and check clearance.
-
Close lighter door.
-
Pull lighter element out until it contacts the area where material was removed -arrow-.
-
Operate lighter door several times and ensure that element does not keep door from opening.
-
Install lighter element correctly.
-
Install lighter assembly into console.
-
Install console in reverse order of removal.
When procedure applies to vehicles within the New Vehicle Limited Warranty, use the following:
Part Identifier:
9062
Labor Operation: 9062510
55TU