audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Fuel Injector|Service and Repair > < Fuel Injector Injection Quantity, Seal and Spray, Checking|Page 10646
Page 4
background image

-

Connect VAG1598/31 test box at wiring harness to Engine Control Module (ECM), do not connect ECM. Refer to "Scan Tool Testing/Wiring and
Component Testing Using VAG1598/31 Test Box", See: Computers and Control Systems/Testing and Inspection 

-

Check following wire connections for open circuit and short circuit to Ground (GND) and B+:

-

Repair open circuit or short circuit if necessary.

If wire connection is OK:

-

Replace Engine Control Module (ECM)

Fuel Injector|Service and Repair > < Fuel Injector Injection Quantity, Seal and Spray, Checking|Page 10646