A4 Quattro Wagon L4-1.8L Turbo (ATW) (2000)
Clutch Switch: Testing and Inspection
Clutch Vacuum Vent Valve Switch -F36- Checking
Special tools and equipment
-
VAG1526A
-
VAG1527B
-
VAG1594A
-
VAG1598/31
-
VAS5051 with VAG5051/1
-
or
-
VAG1551 with VAG1551/3A
NOTE: This signal helps prevent excessive RPM oscillations and tip-in shocks when clutch is disengaged and is required for the cruise control system.
Test sequence
-
Connect VAS5051 tester or VAG1551 scan tool and select control module for engine electronics using "address word" 01. Ignition must remain
switched on. Refer to "Scan Tool Testing/Scan Tool Connecting and Initial Checks" See: Computers and Control Systems/Testing and Inspection
When indicated on display